HGV Driver – Normanton Depot

inside access lease van

Type: Permanent, Full-time & Part-time hours available

Location:  Normanton.

Working hours:  40 hours.

Job Function: To provide timeous professional delivery/collection of units to/from site.

Reporting to: Depot Manager.

Liaising with: Customers, Depot Staff and Hire Desk administrators.

The ideal candidate will have good communication skills, will have excellent planning journey skills.

Responsibilities:

  • Check condition of units and take a pictures on the tablet prior to delivery.
  • Deliver equipment to site and complete handover process with customer.
  • Collect units from site and complete handover process with customer.
  • Conduct thorough inspections of units for any damages/shortages on collection and ensure they are noted correctly on the tablet, pictures are taken and signed for wherever possible by the customer.
  • Carry out daily vehicle checks and reporting any defects. Including correct manufacturers service intervals are adhered to.
  • Ensure digital tachographs are used and downloaded in line with current legislation.
  • Ensure that the company’s health and safety policy and procedures are adhered to in relation to all operations.
  • Keep vehicle organised, clean and tidy at all times.
  • Follow company’s Employee handbook policies and procedures.
  • Any other duties requested by your Manager.

Requirements:

  • Experience in a similar role.
  • Experience with handheld tablets and vehicle condition appraisal would be an advantage.
  • Current Driver CPC digital Tacho card.
  • Excellent communication skills.
  • Attention to detail.
  • 2 years driving experience on a UK driving licence.
  • Be always polite and well-mannered.
  • May be needed to do early starts and occasional nights out.

For more information on this position, please apply today with your latest CV hr@kellinggroup.com

Powered Access Engineer – Normanton Depot

Type: Permanent, Full-time

Working hours: 40 hours.

Job Function: To provide engineering support for the workshop function.

Reporting to: Depot Manager.

Liaising with: Engineers, Parts Dept, LCV Technicians.

Responsibilities:

  • Carry out pre-delivery inspections of vehicle mounted platforms at the Depot.
  • Ensure compliance with the manufacturer’s guidelines, company policy and any regulations affecting the safe operation.
  • Communicate effectively with the Depot Manager with regards to any defects or unsafe equipment.
  • Investigate faults, diagnose, and repair platforms as required to ensure conformance with the company policy.
  • Carry out LOLER inspections in compliance to the manufacturer’s guidelines & regulations.
  • Correctly process all jobs on the works handheld tablet to include the allocation of labour time and any parts used, updating the status of all vehicles as appropriate.
  • Ensure efficient stock control processes are adhered to for all parts/consumables used.
  • Report any potential customer recharges or warranty repairs to the Service Department.
  • Ensure that the company’s health and safety policy and procedures are adhered to at all times.
  • Maintain the workshop/workspace in a clean and safe manner.
  • Follow company’s Employee handbook policies and procedures at all times.
  • Any other ad-hoc duties.

Requirements:

  • Experience with mobile or vehicle mounted access platforms maintenance and inspection routines.
  • IPAF Competent Assessed Person (CAP) qualification.
  • Relevant general maintenance qualification and proven experience gained within the plant rental sector.
  • Experience in auto electrics, hydraulics and diagnostics/fault finding.
  • Ability to prioritise tasks and work well under pressure.
  • Good interpersonal skills and an acute understanding good customer service.

Don’t Compromise: How to boost infrastructure while promoting nature for contractors

At Welfare Hire, our “Don’t compromise” ethos resonates with the government’s challenge of balancing infrastructure development with promoting nature. Our belief is that progress and sustainability can, and should, coexist without compromise. This ethos reflects the idea that while it’s essential to streamline planning processes and expedite critical infrastructure projects, it’s equally vital to ensure that environmental concerns are not side lined in the pursuit of growth.

To achieve both efficient development and nature recovery, Welfare Hire offers a range of smart eco assets and services designed to uphold the highest standards on project delivery without cutting corners on our sustainability responsibilities.

Take a look at our unique, patented smart ECOWC2 as one example of how our solutions can integrate into the current landscape of reform and help infrastructure clients and contractors deliver on ESG and commercial goals.

eco welfare unit

1. REDUCE Your CARBON HANDPRINT

On-site facilities require regular servicing with transport to and from the site. This might not seem like much, but these are the sort of easy-to-solve carbon emitting and water wastage practices which accumulate – and end up making a dent in your ESG score.

The average chemical toilet used on construction sites requires at least one weekly service, and doesn’t use recycled water. But this isn’t construction leaders’ only option.

The unique XL Smart Water  system built into our ECOWC2 towable toilet block and other welfare units boasts more than 6x more capacity. They typically take several months to fill, reducing the frequency of servicing trips and volume of site externalities – and therefore the carbon emissions your site is responsible for. 

Not only that: they also harvest rainwater to create a more sustainable system. Your site is not only responsible for less water usage but you can also report on the smart initiatives taken to make these incremental savings.

2. Improved Employee Experience

Imagine it’s your first day on a construction site: you go to wash your hands, and discover there’s no hot water. It’s a small factor, but over the course of a full work day – and a complete project – this starts to have a real impact on the general mood and morale on-site. 

Better facilities that run smoothly and provide plenty of room can therefore have a dramatic impact on employee experience. It signals to staff that they are valued, helping with general wellbeing, increased retention and loyalty. Improved hygiene also reduces the spread of disease and helps keep your staff safe. 68% of workers say that poor hygiene at work has made them sick and unable to do their job¹ – meaning improved hygiene leads to fewer sick days, higher morale and a more productive workforce.

eco welfare unit

3. Cost Savings

The cumulative costs of poor hygiene are staggering. One study found that employee sickness related to poor hygiene costs UK business more than £1.5 billion each year alone². As a result, improved on-site hygiene facilities are not just a question of ethics or responsibility to your employees – they are a near-guaranteed boost to your bottom line.

Between fewer sick days from employees, less money spent on services and higher retention of staff, the cost savings attributable to improved on-site hygiene facilities start to add up. But how much could your specific site save?

Welfare Hire Measures Your Gains

Welfare Hire offers a range of innovative mobile ECO welfare units fitted with Smart Water systems that improve you ESG, employee experience and bottom line. In fact, our Eco & Social Value Calculator allows you to estimate the exact savings you’ll make by switching to Welfare Hire products.

Want to learn how our ECOWC2 towable toilet block and other welfare units could improve your project?

1.https://www.gov.uk/government/news/uk-confirms-205-million-budget-to-power-more-of-britain-from-britain
1.https://www.gov.uk/government/news/16-billion-investment-brought-forward-to-speed-up-vital-water-infrastructure-projects
2.https://www.local.gov.uk/about/news/1300-clean-power-projects-permission-awaiting-construction-say-councils

Field Service Engineer – Various Locations around the UK

Location: Remote working

Type: Permanent, Full-time

Working hours:  40 hours.

Job Function: To provide on-site engineering support.

Reporting to: Field Service Engineering Manager

Liaising with: Customers, Depot Managers, Field Service Engineers, Service Controllers.

The ideal candidate will have a strong work ethic, have a flexible and ‘can do’ approach, attention to detail and the ability to work quickly and efficiently in a fast-paced environment.

Responsibilities:

  • Implement routine servicing schedule for all equipment out on customer sites.
  • Attend breakdowns on site, fault diagnosis and correct rectification.
  • Carry out planned maintenance for all equipment out on customer sites.
  • Ensure optimum van parts stock level is achieved, always maintained and reviewed.
  • Allocation of any parts used on to the works mobile tablet.
  • Correctly process all jobs on the works mobile tablet and in a timely manner.
  • Report any potential customer recharges to the Service Controller.
  • Provide back-up support in other areas and depots.
  • Ensure company vehicle is kept clean, tidy and maintained as per the manufacturer’s guidelines at all times.
  • Follow company’s Employee handbook policies and procedures.
  • Any other duties requested by your Manager.

Requirements:

  • Experience combined with relevant mechanical / electrical knowledge.
  • Drivers licence.
  • Attention to detail.
  • Flexible with regards to travel, tasks performed and working hours.
  • Ability to work alone or as a team.
  • Excellent time keeping.

For more information on this position, please apply today with your latest CV hr@kellinggroup.com